Projector Reviews Images

InFocus X9 Projector Calibration

Posted on November 18, 2008 by Art Feierman
We calibrate each home theater that is reviewed. The InFocus X9 receives a pretty standard calibration, there's always more that can be done by some of the "hi-end" calibrators.

Color Temperature

Interestingly, the color temperature balance of the X9, right out of the box, is better with Brilliant Color on, than off. All four modes - PC, Movie, sRGB and Game, have almost identical color temperatures, with white consistantly around 6120K, with Brilliant Color off, but those same four modes are all in the 6556K to 6593K range, with Brilliant Color on.

Here is the same data as found in the Brightness section, which shows the white (100 IRE) temperature for each mode, with Brilliant Color off, and with it on:

With Brilliant Color Off and On

PC 6120K , 6543K
Movie 6118K, 6574K
sRGB 6112K, 6593K
Game 6119K, 6556K

The X9 has no separate R,G,B controls to fine tune grayscale balance, just a color temp slider. That adjustment has virtually no effect with Brilliant Color of, and isn't needed with Brilliant Color on.

100 IRE: 6574K
80 IRE 6582K
50 IRE 6478K
30 IRE 6478K

And this set is for PC mode (Game mode is almost identical, within the error range of our equipment). Again,

100 IRE 6543K
80 IRE: 6548K
50 IRE 6337K
30 IRE 6169K

Both of these are very much "good to go", a good thing, due to the lack of separate controls to adjust.

For sports and some HDTV viewing in PC (or Game) mode, you may want to increase the color temp setting by one, to reduce red a small amount. I suggest trying that out. I recommend not changing the color temp for Movie mode.

Bottom line, is that with Brilliant Color on, in Movie mode, the InFocus X9 really does have extremely good color, without a calibration of grayscale.

Basic Settings

Header Content
PC Movie sRGB Game
Contrast 0 (-5) -1 (8) -1 (8) -1 (8)
Brightness -1 (-17) 3 (-15) 4 (-17) 4 (-17)
Color temp 0 -1 -1 -1
Color (0) for all
Tint (0) for all
Degamma 0 -1 -2 -2

Lamp Mode: Full power for all measurements, and settings.

As is typical, there is a slight shift in color in Eco-mode. We did check out Eco-mode's effect on color temperature. Based on our measurements for 100 IRE, in low power, Movie mode, with Brilliant Color off, was slightly cooler (more blue), at 6238K instead of 6118K at full power.That's a slight shift, but in the right direction, toward 6500K. That means Movie mode is a tiny bit closer to ideal when in low power. With Brilliant color on, since those numbers (except dark gray (30 IRE) are all around 6550K, again, no harm and maybe a touch better in low power - not enough to really consider.

RGB Settings

Once again, the X9 does not provide separate RGB controls, so no grayscale calibration was done.

Overall, Movie mode, with our settings, really was rather impressive, and of course, very bright. PC and Game mode are only slightly different, and either can be used as your "brightest" mode.

Latest Reviews

February 25, 2024

Introducing the Hisense C1: A cube-shaped 4K UHD lifestyle projector with an RGB triple laser light source and integrated JBL ...

February 19, 2024

The BenQ X3100i is a 4LED, 4K UHD (3,840 x 2,160p) 0.65" DLP short-throw gaming projector that offers a BenQ-rated ...

January 20, 2024

The BenQ V5000i is a $3,499 smart ultra-short throw 4K projector with RGB triple laser source. Ideal for vibrant, bright ...

January 2, 2024

The BenQ HT3560 is a 4K UHD projector offering vibrant colors and advanced features for $1,599. It offers a manufacturer-rated ...

© 2024 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram