Projector Reviews Images

Optoma HD131Xe Projector - Hardware Tour 2

Posted on December 16, 2013 by Art Feierman
OPTOMA HD131XE HARDWARE TOUR 2 - PROJECTOR MENUS AND REMOTE CONTROL...

Optoma HD131Xe Menus

The HD131Xe menus are nicely laid out.  I have but one complaint:  Two of the menus are only partially visible in that there are additional menu items if you scroll down to the last item showing, and keep scrolling.

There's only a tiny little down pointing triangle, so many folks might miss that.  If you do miss it, you'll be wondering, for example, how to change the projector from Bright Lamp to Eco.

I've dropped most of the menus into this player, adding a sentence here and there as a caption to point out a few things.

HD131Xe Menus

Main Image/Picture Menu

Pretty typical. Calibration controls are in the Advanced sub-menu

Default Color Temp settings

This Optoma offers the usual controls. Calibrate the grayscale by clicking on White in the Advanced menu

The Calibration Controls

From this menu, control RGB for grayscale (White), or calibrate the individual primaries and secondaries (RGBCMY)

CMS - Individual Color Calibration

Fine tune individual colors with Hue, Saturation, and Gain (brightness)

Calibrate Grayscale with RGB

Only one sider for each color, no separate Gain and Bias

3D Sub-menu

HD131Xe offers 3D to 2D conversion. At first I misread that, and thought it offered 2D to 3D.

Main Setup Menu

Language choice, Menu locations, Orientation, ID (for networking)...

Audio Sub-menu

Speaker On/Off, Volume, Mute, Audio Inputs

Options Menu

Input select, auto select, high altitude, test patterns, advanced (lamp brightness…)

Inputs and Connectors - Back of HD131Xe Projector

No surprises on the back panel   Looking at the inputs and connectors starting at the left:

There are two HDMI 1.4 connectors, compatible with all the usual 3D modes including Blu-ray 3D.  Next over is the basic composite video input, for your lower level game machine, other sources without advanced resolution.  Next comes a single HD15 connector for either an analog computer input (you know, the standard, for decades), or for a component video input.

Next over to the right, but lower is a similar connector, this time a DB9, for a serial port used for the usual "command and control" type room systems.

That's followed by three mini audio connectors:  Two different audio inputs (one for "video" sources, the other for computer sources), and an audio output, which could come in very handy if you travel with this projector, and get a chance to plug into a bigger sound system to fill larger rooms than the 10 watt speaker can handle.

Finally, (other than the Kensington lock, power receptacle, and the security bar), is a Din connector for the optional 3D emitter.

HD131Xe Remote Control

Optoma HD131Xe remote controlOptoma's remote is a good one.  It's range isn't bad, but it is a bit more finicky than some (you'll have to point a little better than with some more powerful remotes, if you are bouncing the remote control's signal off of your screen, to the projector).

The layout is good, it's light, the buttons are mostly very small, but the spacing is good.

Strange as it sounds, my only real complaint is that the bright LED back light is downright blinding if you have fully darkened your room.   That makes it tough if you are playing around and want to adjust the color.  Well, if that's the worst thing, then we're in good shape.

Let's run though the organization of this remote, from the top right.

Which means we start with the Power button, (once on, twice to power down), and across from it, the backlight button.  Note, though, that pressing any button lights up the backlight, which stays on for about 5 seconds.  Next up are two rows with four total aspect ratios.

Underneath them, in the center is a icon that looks sort of like Mickey Mouse ears, but brings up the Display menu, with the various Picture modes.   I presume the "ears" are supposed to be the top of an old film projector with its reels.

Right below it is a button for switching the projector from Bright, to Eco mode.

The next four buttons give you direct access to other controls, including:

Brightness, Contrast, Gamma, and the L/R invert for 3D glasses.

That takes us to the navigation controls, which as noted earlier is slightly different than on the control panel.  This time the arrow keys are still in a round formation, and work the same when the menus are up, but when they are off, the up and down arrows double as volume up and down, not keystone correction.  The left arrow will move you through your Source options

That leaves us the bottom section.  The Menu button itself is below and to the left of the navigation ring, while the remaining five buttons let you jump directly to your desired source.

Easy enough!

HD131Xe Lens Throw, Lens Shift

Lens Placement
Closest Furthest
Lens Throw 10.89 feet 13.07 feet
Lens Above Top of Screen Below Bottom
Lens shift (offset) 8 inches 8 inches

OK, the zoom range is rather limited, as is typical in this price range, but as you can see from the chart, for a 100" screen the front of the lens can be be anywhere from about 10 feet 11 inches from the screen or as far back as about 13 feet 1 inch.

When it comes to vertical placement, to avoid using keystone correction (always a good idea, if you want the best picture), the projector will sit on a table, with the center of the lens about 8 inches below the bottom of the screen surface of a 100" screen.

Conversely, if ceiling mounting this projector, the center of the lens would be about 8 inches above the top of the screen surface, for the same sized screen.  If your screen is 20% larger, for example, than to figure out your lens throw and height placement, just multiply these numbers by 1.2 (120%).  It's that easy.

Latest Reviews

February 25, 2024

Introducing the Hisense C1: A cube-shaped 4K UHD lifestyle projector with an RGB triple laser light source and integrated JBL ...

February 19, 2024

The BenQ X3100i is a 4LED, 4K UHD (3,840 x 2,160p) 0.65" DLP short-throw gaming projector that offers a BenQ-rated ...

January 20, 2024

The BenQ V5000i is a $3,499 smart ultra-short throw 4K projector with RGB triple laser source. Ideal for vibrant, bright ...

January 2, 2024

The BenQ HT3560 is a 4K UHD projector offering vibrant colors and advanced features for $1,599. It offers a manufacturer-rated ...

© 2024 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram