Projector Reviews Images

Optoma HD803 Home Theater Projector: Physical Tour

Posted on February 20, 2008 by Art Feierman

Optoma HD803 Home Theater Projector: Physical Tour

The HD803 projector looks just like all the other current Optoma 1080p projectors (and I've borrowed images). It is reasonably small, with the lens placed on the far left (looking at the projector from the front). It offers a 1.2:1 zoom ratio, allowing some (but limited) placement flexibility. There is also a front infra-red sensor for the remote control just below the lens and closer to the center. With a 100" diagonal 16:9 screen, the front of the projector can be placed as close as 13.4 feet, and as far back as 16.1 feet. If your screen will be larger or smaller, you can figure out the distances from these numbers.

The Optoma HD803 has its control panel laid out in a straight line, on the top, along the back edge. This means that the menu keys are not laid out in the traditional diamond shape, which is unfortunate. That said of course, you would normally be using the remote control regardless, so it's not a big deal. The buttons have very bright blue LEDs that can partially light your room up, but they turn themselves off automatically when the projector is showing content. When you power down, they flash while the Optoma HD803 projector is cooling down, and it's almost an impressive light show.

The Optoma HD803's control panel runs along the back of the top of the projector. On the far left is the power switch (once for on, twice for off). Moving to the right, next is the Menu button, followed by the up and down arrows, then the left and right, and finally, the Enter key. The left arrow doubles as the Source select button when the menus aren't in use, and the right arrow, doubles as the re-sync button, primarily for locking on to a PC analog source.

Moving to the back, the input panel like its sibings, has three digital inputs; two HDMI inputs and a DVI. All three support HDCP. The DVI input can be used either for a digital input, or as either a second component video, or as the analog input for a computer. The dedicated component video input has the usual three RCA jacks. Of course, there's the traditional composite, and S-video inputs, plus an RS-232 for "command and control" by a room control system or computer. Lastly, the HD803 projector has a 12 volt "trigger" for controlling a properly equipped motorized screen.

There are no filters to change, and the projector has a sealed light path, so dust is not an issue.

Latest Reviews

February 25, 2024

Introducing the Hisense C1: A cube-shaped 4K UHD lifestyle projector with an RGB triple laser light source and integrated JBL ...

February 19, 2024

The BenQ X3100i is a 4LED, 4K UHD (3,840 x 2,160p) 0.65" DLP short-throw gaming projector that offers a BenQ-rated ...

January 20, 2024

The BenQ V5000i is a $3,499 smart ultra-short throw 4K projector with RGB triple laser source. Ideal for vibrant, bright ...

January 2, 2024

The BenQ HT3560 is a 4K UHD projector offering vibrant colors and advanced features for $1,599. It offers a manufacturer-rated ...

© 2024 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram