Projector Reviews Images

Sony VPL-HW40ES Projector Review - Performance 1

Posted on July 10, 2014 by 
SONY VPL-HW40ES PROJECTOR - PERFORMANCE 1: Brightness (Pre- and Post-Calibration)

Sony VPL-HW40ES Brightness

Sony VPL-HW40ES Projector - Brightness by Mode, Mid-zoom (at 100 IRE)
Mode Brightness (Lumens) Color Temp at 100 IRE
Reference 1497 6721
TV 1509 6723
Cinema Film 1 1497 6721
Cinema Film 2 1354 5720
Game 1722 6860
Photo 1330 5725
Bright Cinema 1592 7787
Bright TV 1616 7789
User 1497 6722

1500 lumens calibrated makes this Sony a veritable light canon.  Oh, there are some much brighter projectors out there that can be had for the home, but those few are more expensive, and not really true home theater projectors.  There are a few other projectors that are somewhat brighter, but most can’t match this Sony in terms of brightness, and the ability to handle larger screens or ambient light.

Mike measured each of the modes, measuring lumens, and the color temperature at 100 IRE (white) as seen in this chart.  As you can see, all the modes are similar in brightness, well, within a few hundred lumens.  We measure, as noted, with the zoom lens set to mid-point.  Interestingly the Sony’s optics produce about the same brightness at mid-point as in full wide angle.  Most projectors with similar lenses get an extra 15 to 25% more brightness, an advantage if its convenient to mount your projector relatively close.

Here’s a sampling of the color temperature range across different brightness levels, pre calibration, for Reference mode, which we noted is essentially the same as Cinema Film 1 and User.  It exhibits a slight shift from a bit too much red in the darker ranges to a touch cool by the time we approach white.

Effect of zoom on lumen output (Game mode):
Zoom out 1731
Mid-zoom 1722
Zoom in 1588

This table shows the effect of the lenses zoom on brightness.  As discussed in greater depth the Special Features page, the lens is unusual in that there's no significant loss of brightness going from wide angle to mid-point on the zoom.

Sony VPL-HW40ES Brightness: Calibrated

Color Temp over IRE Range (Post calibration):
2.2 Gamma 2.4 Gamma
20 IRE 6413 6219
30 IRE 6432 6376
40 IRE 6476 6375
50 IRE 6578 6500
60 IRE 6647 6598
70 IRE 6695 6675
80 IRE 6711 6690
90 IRE 6725 6721
100 IRE 6721 6721
Average gamma 2.11 2.30

The settings changes made when calibrating were slight enough to make almost no change in measured brightness, within our margin of measuring error.  Let’s just call it 1500 lumens calibrated, even though Mike's official number is 1512.  Or as Mike put it, no real difference in brightness - calibrated or not.

We did not calibrate low power mode, but it should work out to about 975 lumens calibrated in Low lamp.   As discussed below, the color temp balance in Eco is not the same as at full power.  Therefore, while this Sony VPL-HW40ES was nearly perfect out of the box in terms of color, that is definitely not the case for the Sony’s Eco mode.

Sony VPL-HW40ES Brightness: Calibrated, Eco-mode

Brightness (Game mode) - Full power vs.  Eco
High Power 1722 lumens
Low (eco) Power 1117 lumens

To drop the projector into “eco-mode” the setting is found in Cinema Black Pro, on the main menu.  The choices are simple:  High, and Low.

Switching to Low reduced brightness by 35.1 percent – let’s call it 35%.  In a home theater type room, many owners will be able to run in low power for typical movie viewing thanks to still having almost 1000 lumens calibrated.

The big advantage of using eco-mode is cost related.  Here’s the thing:  While brightness drops 35%, there is a huge gain in lamp life according to Sony.

My general recommendation is that the HW40ES is a great projector for the money, but for roughly an extra $1000, I consider the HW55ES to be the better investment and worth the difference.  I mention this now, because lamp life comes into play.

The HW40ES claims a very impressive 5000 hours in Eco-mode (aka Low lamp), but things start getting expensive if running the projector at full power where the lamp is rated only 2000 hours, which, these days, is way below average.  For a “worst case” comparison, consider that the Sony lamp lists for $369, while the Epson 5030UB’s lamp lists for $249 (both get discounted), but the Epson lamp at full power is rated 4000 hours compared to 2000 for the Sony.  (The Epson is 5000 hours, just like the Sony, when in Eco-mode.  So, the point is, if you run in full power you definitely should factor in unusually high lamp costs into a Sony HW40ES purchase.

A reminder:  Lamp based projectors do not calibrate the same in full power and eco-modes.  Therefore, in theory, if you plan to switch back and forth, you would want both calibrated.  We don’t do that, but I can say from playing with the HW40ES, that the out of the box color definitely isn’t as good in “eco-lmode” on this HW40ES I have here.

Latest Reviews

February 25, 2024

Introducing the Hisense C1: A cube-shaped 4K UHD lifestyle projector with an RGB triple laser light source and integrated JBL ...

February 19, 2024

The BenQ X3100i is a 4LED, 4K UHD (3,840 x 2,160p) 0.65" DLP short-throw gaming projector that offers a BenQ-rated ...

January 20, 2024

The BenQ V5000i is a $3,499 smart ultra-short throw 4K projector with RGB triple laser source. Ideal for vibrant, bright ...

January 2, 2024

The BenQ HT3560 is a 4K UHD projector offering vibrant colors and advanced features for $1,599. It offers a manufacturer-rated ...

© 2024 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram