Comments on: Runco LS10d home theatre projector – Review in final stages

By: Art Feierman

Art Feierman — Tue, 22 Mar 2011 00:25:37 +0000

Greetings Nuno,
I really do not see much hope that the settings used by the DHD processor and LS-10d, would mean much to the LS-10i. Even if the scales are the same, I wouldn’t expect an i and a d to look the same “out of the box” due to the different processing. It’s possible, but I don’t think likely. Meanwhile I emailed Mike, he’s the one who did the calibration, and has the installation codes. I’ll see if he remembers, and if he thinks I’m wrong. -art

By: Nuno Sousa

Nuno Sousa — Thu, 17 Mar 2011 11:01:17 +0000

Ok Art,

Thank you.

Can you please tell me the control range of brightness/contrast the LS10d have ?

My LS10i have the range 0-200 (100 by default).

The LS10i have the choice of gamma 2.35…and the LS10d?

kind regards

By: Art Feierman

Art Feierman — Wed, 16 Mar 2011 16:58:11 +0000

Hi Nuno,

The calibration settings were posted last evening… remember, this is for the LS10d. I suspect that an LS10i will calibrate somewhat differently since it’s not using the DHD4 outboard processor. -art

By: Nuno Sousa

Nuno Sousa — Wed, 16 Mar 2011 16:09:32 +0000

Hello Art,

Thank you for your great review of the LS10.

Can you pleae share with us the Mike’s calibration settings used in your review?

By: Art Feierman

Art Feierman — Fri, 11 Mar 2011 21:56:27 +0000

Hi Dan,

The Runco LS-10d review should be fixed now. Not sure what happened, had to remove and reload the link into the database… Had this problem once before. If that doesn’t do it, try refreshing your cache.

That was what cured it last time… And should do so in a pinch if it’s not working yet on your computer. We’ve confirmed working on IE, Firefox and Safari…

By: Dan

Dan — Fri, 11 Mar 2011 14:09:41 +0000

Hi Art, the link to the review is broken, looking forward to reading it