Canon Realis SX60 Projector – Overview
Let’s start off with the SX60 remote control.
The remote is backlit (backlight button is on the right of the bottom row. Brightness of the backlight is acceptable. Not the brightest, but far from the dimmest.
The layout of the remote control is good, and you will find some features here typical of business projectors, that are not found on home theater models, including a page up and down buttons, digital zoom, right mouse click for limited “remote mousing”.
There is also audio control, because the Canon does have a speaker, for presentation purposes. There are buttons for power zoom and focus, and the traditional four arrow keys for menu navigation. There is even a freeze frame (which was handy for photographing some of the HD images.
Overall, a nice, compact remote control.
Canon SX60 Menus
The Canon SX60’s menu layout is pretty respectable.
Below you will find several shots of the menus, mostly of those relating to image control.
Of particular note is that the Canon SX60 offers rather in-depth control of color. This will be appreciated by commercial users that require precise color accuracy, such as photographers, architects, possibly medical imaging, and of course a host of other applications.
To the right you can see the image modes selected, including modes for presentations, sRGB for color matching to applications relying on sRGB for color accuracy, a Movie mode, and of course the darker Home Cinema mode.
SDE (Screen Door Effect) and Rainbow Effect
Here’s a projector without either. As you saw in the Image performance area, the pixels are so unnoticeable compared to LCD and DLP techologies, that screen door effect will not come into play at any distance even remotely considered normal for viewing.
Since the SX60 uses three LCOS panels, it works more like an LCD than a DLP projector in regards to rainbow effect, in that it doesn’t have a spinning color filter wheel. The result, there is no rainbow effect.
So, the SX60 offers the best of both worlds, no screen door, no rainbows.
When we calibrated the projector we took brightness measurements. The Canon SX60 produced around 2000 lumens in full power mode in the brighter settings modes (it varied depending on the settings chosen – Standard, Presentation – etc.. In Home Cinema mode with low power, it produced just under 400 lumens. If the lamp power is set to the same (high or low) for Home Cinema, or Standard, the difference in brightness (lumens) is four fold.
Sadly, Canon does not provide life expectancy info for the SX60, so we can only guess. We should therefore assume that it is at least on the low end of normal for projectors, which would be 1500 to 2000 hours under full power mode, and 2200 – 2500 under eco-mode. Of course, it could be longer, but those numbers should be reasonable guess.
Audible Noise Levels
The Canon SX60 is relatively quiet in low power mode. Not as quiet as the better home theater projectors, but pretty average, in that regard. In full power mode, it is, of course, noisier, but I would say not as loud as many business projectors. Even in small room environments, under full power, I don’t believe anyone will be complaining about the Canon’s fan noise. The claimed specs are 27db in low power, and 30db in full power. I might guess that the first number is conservative, but under full power it sounds noiser to me than other projectors rated 30db.
The SX60 has some nice touches, including a spotlight feature to highlight an area (actually it leaves the area you want, at full brightness while dimming everything else) you wish to point out while presenting. Arrow keys allow navigation. You can control the projector from the included wireless remote or a USB mouse (not included).
Present and Go
Finished your presentation? Just unplug immediately, the SX60 will continue its cool down process, with it’s fan running without being plugged in. Remember, though, not to put the SX60 back in its shoulder bag, or other highly confined area, until the fan turns off and the unit’s cool down is complete.
The SX60 offers an optional networking adapter. This will not only allow you to interface to a network, but your projector can notify you of problems, such as replace lamp, a failure, etc., via email over the network.
You May Also Like
Viewsonic Pro8530HDL Projector Review
BenQ HT6050 Home Theater Projector Review
The Optoma ML750ST LED Projector Review – Part 1
HT Projectors: Sony VPL-HW45ES vs Epson HC5040UB
Epson Home Cinema 5040UB vs. JVC DLA-RS400U – A Comparison Review
JVC DLA-RS600U vs. Sony VPL-VW365ES – A Comparison Review
InFocus IN1118HD Mobile Projector Review
Sony VPL-HW45ES Home Theater Projector Review