Passive 3D Projection – Part 8
June 8, 2012 | 
Author This post continues the series of blogs discussing do-it-yourself (diy) passive 3D projection systems that use two conventional front projectors. In my previous blogs of this series the discussion has focused on passive 3D projection system that use polarized light as the means to separate the right from the left images that make up the stereoscopic image pair that creates the 3D effect. This new blog starts the discussion on the use of dual projector system that uses color bandpass filtering (i.e., “wavelength multiplexing”), instead of polarization, as the means to separate the right from the left images. In simply terms, wavelength multiplexing, uses two projectors equipped with filters that pass only very narrow bands of colors within the visible spectrum with one of the filters passing a set of colors that is slightly offset in wavelength from the set of colors passed by the filter being used on the second projector. The viewers then must wear passive 3D glasses whose lenses are filters that pass narrow bands of the visible spectrum that matches those being used on the two projectors. Read the rest of this entry »
Posted in 3D Technology, Passive 3D, Projectors | 
Tags: 3D Technology, Dual Projector 3D, Passive 3D, Projector Reviews blog | 
3 Comments »
Passive 3D Projection – Part 7
This post continues the series of blogs discussing do-it-yourself (diy) passive 3D projection systems that use two conventional front projectors. In my previous blog (i.e., Part 6 of this series), I completed (at least for the time being) the discussion on projectors suitable for use as part of a passive 3D projection system that uses polarized light as the means to separate the right from the left images that make up the stereoscopic image pair that creates the 3D effect. This new blog wraps up the current discussion on passive 3D projection systems that use polarized light. Read the rest of this entry »
Posted in 3D Technology, Image Processing, Passive 3D, Projectors, Screens for 3D | Tags: 3D screens, 3D Technology, Passive 3D, Projector Reviews blog | 2 Comments »
Passive 3D Projection – Part 6
This blog post continues the discussion of do-it-yourself (diy) passive 3D projection systems that use two conventional front projectors. In my previous blog (i.e., Part 5 of this series), I discussed using projectors that inherently project polarized light as well as the role of external filters needed for use with such projectors. For this new blog, I will address one comment received to that previous blog as well as continue the discussion on passive 3D projection systems that uses polarization as the means to separate the right from the left images that make up the stereoscopic image pair that creates the 3D effect. Read the rest of this entry »
Posted in 3D Technology, Passive 3D, Projectors, Screens for 3D | Tags: 3D Projector, 3D Technology, Passive 3D, Projector Reviews blog | No Comments »
Passive 3D Projection – Part 5
This is Part 5 of a series of blogs discussing passive 3D projection systems.
For these blogs I am focused on passive 3D systems that use polarization as the means to separate the right from the left images. Previously I discussed (in Part 3 – HERE) the role of the 3D Source, the 2-way HDMI Splitter and the 3D Processors. In my most recent blog (Part 4 – HERE) I discussed the different types of polarization, sources for polarizing filters, and projectors with non-polarized light output. Also in these earlier blogs I discussed some general characteristics to consider when selecting the projectors to be use for a do-it-yourself (diy), dual projector passive 3D setup. For this 5th installment of this series, I am discussing the use of projectors that inherently project polarized light and how these can be used in a diy 3D passive linear polarized dual projector system. Read the rest of this entry »
Posted in 3D Technology, Passive 3D, Projectors | Tags: 3D Projector, 3D Technology, Dual Projector 3D, Passive 3D, Projector Reviews blog | 12 Comments »
Passive 3D Projection – Part 4
This is Part 4 of a series of blogs discussing passive 3D projection systems.
The current discussion is focused on passive 3D systems that use polarization as the means to separate the right from the left images. Previously I discussed (in Part 3 – HERE) the role of the 3D Source, the 2-way HDMI Splitter and the 3D Processors. Also in that earlier blog I discussed some general characteristics to consider when selecting the projectors to be used for a do-it-yourself (diy), dual projector passive 3D setup. For this part of the series I continue the discussion by providing specific details for making the selection of a suitable pair of projectors. Read the rest of this entry »
Posted in 3D Technology, Passive 3D, Projectors | Tags: 3D Projector, 3D Technology, Dual Projector 3D, Passive 3D, Projector Reviews blog | 3 Comments »
Passive 3D Projection – Part 3
This blog is a continuation of my previous discussion on passive 3D projection (HERE). Specifically, this blog is focused on do-it-yourself (DIY) dual projector passive 3D projection systems using polarization as the technique to separate the right from the left images. Future blogs will discuss DIY 3D passive dual projector systems using other technologies. Read the rest of this entry »
Posted in 3D Sources, 3D Technology, Image Processing, Projectors | Tags: 3D Projector, 3D Technology, Blu-ray 3D, Dual Projector 3D, HDMI 1.4a, Passive 3D, Projector Reviews blog | 8 Comments »
Passive 3D Projection – Part 2
This blog is part 2 of a series on passive 3D projection. Part 1 was posted HERE. In this new blog I begin with a discussion of passive 3D projection systems for a home theater that is not specific to either of the alternative passive technologies for 3D (see my previous Blog for a discussion these alternative technologies). After this initial discussion I move on to more specifics on using polarization as the means to separate the right and left image pairs that make up the stereoscopic (i.e., 3D) image. Read the rest of this entry »
Posted in 3D Technology, Projectors, Screens for 3D | Tags: 3D Projector, 3D Technology, Passive 3D, Projector Reviews blog | 3 Comments »
Passive 3D Projection – Part 1
This Blog starts a discussion on passive 3D projection systems. I expect this discussion will continue over several future blogs. For this initial blog I present some of the fundamentals of passive 3D projection. This is intended to prepare the reader for more in-depth discussions of the alternative technologies and descriptions of do-it-yourself (i.e., DIY) dual projector passive 3D projection setups. Read the rest of this entry »
Posted in 3D Technology, Projectors, Screens for 3D | Tags: 3D Technology, Passive 3D, Projector Reviews blog | 2 Comments »
More 3D Crosstalk Testing – JVC and Epson
This Blog is a follow-up to my two earlier blogs of December 14th and December 19th on 3D crosstalk (i.e., 3D ghosting). In the second of those previous blogs I presented some results for 3D crosstalk measurements taken for my own JVC DLA-RS40 projector. I have now taken one critical additional measurement for that projector plus also present results from my testing of an Epson Home Cinema 5010 projector. This is physically the same Epson projector Art used for his review HERE at Projector Reviews. I have done a visual comparison of the 3D crosstalk levels using full resolution 1080p 3D material (input to the projector at 24Hz using the Blu-ray 3D standard frame packing signal format) and also half resolution 3D programming via DirecTV (provided from my DirecTV HD-DVR in 1080i/60 3D side-by-side format). For my 3D crosstalk measurements I used a Blu-ray 3D test disc which I have created (i.e., in full resolution 1080p at 24Hz in the frame packing format, as per the Blu-ray 3D standard). Read the rest of this entry »
Posted in 3D Technology, Projectors | Tags: 3D Projector, 3D Technology, 3D Testing, Projector Reviews blog | No Comments »
CES 2012 Preview
This blog offers a preview of some products being introduced at the 2012 International Consumer Electronics Show (CES) being held this week (Jan. 10-13) in Las Vegas. The products discussed below are limited to only those that have been announced in advance of the Tuesday (Jan. 10th) start of the show. While CES traditionally is not the primary trade show for the introduction of new home theater oriented projectors (CEDIA in the USA and IFA in Europe are where most manufacturers introduce new home theater projectors), it is the premier trade show for the introduction of most other consumer electronics products. This includes new flat panel HDTVs, Audio/Video Receiver, Speakers, etc., as well at computers, networks, smart phones, automotive electronics, and many electronic gadgets. Art (from Projector Reviews) is attending the CES and will be reporting via Podcast (Info HERE and the Podcast site it HERE) on projector related (home theater or business) products being introduced at the show. Read the rest of this entry »