Samsung SP-F10M LED 3-LCD Multimedia Projector Review
The Samsung SP-F10M has a solid feel to it and a clean appearance. Starting with the front panel, the lens is just to the right of center and recessed from the front face. There is a supplied lens cap which fits over the lens surround to further protect the lens. The cap can be tethered to the projector to an attachment point below the lens. Just behind the lens, in a recess in the top of the projector, are tabbed zoom and focus adjustment rings. There is an IR receiving eye just to the left of the lens. To the right of the lens is an air exhaust vent and there is an air intake vent to the left of the lens. There are two front height adjustment feet (one in each front corner), each with the usual push-button release. Fine height adjustments can also be made to each foot by screwing the foot in or out. Unfortunately, there are no adjustment feet in the rear, but having the two in front does allow for some leveling of the projector when table mounted on a less than level surface.
Moving to the top of the projector, facing it from the front, there is a control panel right behind the zoom and focus rings. This control panel includes just the most basic functions, including indicators for power on, lamp status and for warning of projector problems (like overheating). There are buttons for Power, Source selection and accessing the on-screen menu. Above those are buttons for menu navigation (Up, Down, Left, Right) and to select from the menu. The Left and Right menu navigation buttons also function as Volume Down and Up respectively.
The only thing on the left side (again facing the front of the projector), toward the front, is an air intake vent. On the right side, are two vents, an exhaust vent near the front and an intake vent at the rear. Moving to the rear panel, going from left to right, there is a LAN jack for a network connection, an S-video input and an audio output. These are followed by a PC VGA input and output, an HDMI input, an IR receiving eye and an RS-232 port (for computer control of the projector). There is also a USB input for PC-free presentations, followed by a composite video input and stereo audio inputs, for connection to an A/V component. Finally, along the bottom of the rear panel are a Kensington lock slot, the power cord socket and the built-in 7-watt speaker.
SP-F10M Remote Control
The SP-F10M’s remote control is nicely laid-out, with mostly white buttons with black lettering on a white background. The Menu and Power buttons stand out (as they should) by being green and red respectively. There are also four unlabeled, colored buttons (Red, Green, Yellow and Blue), which access special functions when the projector is in Media Play mode.
Buttons are well grouped and cover many of the important functions without accessing them through the menu. There are the usual buttons for accessing and navigating the menu, adjusting keystone correction, auto adjustment, blanking the screen, digital zoom, volume and mute. On the downside, there are no individual input selection buttons, just a single button that scrolls through the inputs. Also, it would be nice if there were a button to change the various picture modes without having to enter the menu.
There is no backlighting or even glow-in-the-dark buttons, but this is the norm with multimedia projectors, as backlighting can often be distracting during a presentation. However, the remote is easier to read and operate than much of the competition, so there would seldom be a problem using the remote in a darkened room.
You May Also Like
JVC DLA-RS6710U, RS67U, X900R, 4K Home Theater Projector Review
Casio EcoLite XJ-V1 Projector Review
Viewsonic PJD5555w DLP Multimedia Projector Review
InFocus IN126STa Short Throw Projector Review
ViewSonic PJD7822HDL Home Entertainment Projector Review
Epson Pro-Cinema LS9600e Projector Review
Canon REALiS WUX6000 Projector Review
NEC NP-PA521U Projector Review