Posted on March 14, 2008 By Art Feierman
Virtually all of the reviews of these projectors have a section on screen recommendations for that projector, with comments relating to how large a screen you want, and your room lighting conditions.
In addition, our site has several articles written about choosing screens, different types of screen surfaces, calculating screen dimensions and more. Click to check out our Projector Screens section of the site.
You will get more out of your projector and complete room setup if you pair the right screen to match your projector, room lighting, the brightness of your walls and ceiling, the mix of content – Movies, General HDTV / TV, Sports, and Gaming.
Here are twelve tips to consider:
1. High Contrast Gray screens work well if you have ambient light (intentional or not) coming at the screens from the sides. These screens reject that light, and better prevent the image from washing out.
2 High Gain screens (the brightest) can help you fill a larger screen with a less bright projector, or use a bigger screen with a bright projector, but there are trade-offs. The higher the gain screen, the more roll-off you’ll see as your eye moves to the corners of the image. With high gain screens you also have a much narrower viewing cone – the area you can sit in to enjoy the best picture quality.
3. The most typical white surfaced screens have gains from 1.0 to 1.4. Good ones should have no visible hotspotting, nor visible roll-off in brightness in the corners. And you can sit just about anywhere and get a good picture.
4. High Contrast Gray screens will effectively lower your black levels, a most desireable thing. The high contrast aspect serves to maintain a dynamic looking image. These screens can have gains anywhere from .5 to a relative 1.3 (we won’t go into “relative” at this time).
5. If you are going with a motorized screen, please get a tensioned one. While that adds to the price, the screen should stay very flat for years. Even slight waves or rolls on a screen is extremely noticeable when viewing. When it comes to controlling it, most screens have options to work with 12 volt triggers on projectors, infra-red, or RF remotes.
6. Fixed wall screens are the best at being perfectly flat. Pull-down screens are the least expensive, but, again, get a tensioned one. Special paint to paint a screen on your wall, is inexpensive, and works pretty well, but a good screen will serve you better. (Let’s say, those screen paints are better than your standard wall paint, which even if white, will give you a real hot spot.)
7. Consider your seating: Distance, also whether you will have some folks sitting behind others (whether in formal theater chairs, or “normal” furniture like a couch). How high off the floor your screen starts can determine whether the folks in the back can see. Most likely the largest group of people set their screen height so that their eye level is at least as high as the bottom of the screen, and even with 1/3 of the way up the screen as the highest point. Do what works for you. In my larger theater, I have my screen mounted high. It actually starts about 18 inches above my seating level, but that’s the way I wanted it, because I like to kick back in my captain’s chair, at a pretty laid back angle. In addition, I have a large couch behind the two captain’s chairs, and everyone in back can easily see the entire screen.
8. Some folks want the best sound placement, and want their center, left and right channel speakers mounted in wall behind the screen so that the sound more precisely seems to come out of the mouths of the people speaking. No problem, there are plenty of acoustic screen surfaces out there. There are some trade-offs though. Overall, acoustic surfaces aren’t quite as good as their non-acoustic counterparts, but the better ones really are extremely good.
9. Pricing for screens is all over the map. There’s everything from lower cost Chinese or Taiwanese made screens (such as Elite Screens) to very high end ones made by companies like Stewart Filmscreen and Screen Innovations. Other names include Da-Lite, Draper, Vutec, Grandview… Overall Stewart is almost certainly the top mainstay brand. Their Studiotek 130 G3 and Grayhawk G3 are pretty much conisdered reference standards. (I have their Firehawk G3). The price is up there though, costing 2 to 4 times as much as the very low cost screens. Low cost tensioned pull-down screens start around $200. A very good fixed wall screen of average size can be had for well under $600, while you can spend 3 or four times that for the very best. High priced masking motorized screens can set you back anywhere from probably $4000 to $20,000.
10. Masking systems – a great idea. Basically they chang
First, it would be an impossible task to do head to head comparisons for all of the projectors in the review there are thousands of combinations. Even head to heads with just those that won awards would be at least in the many dozens. Lastly, some of the most interesting comparisons are between award winners and those that did not get an award.
Again, a reminder: Each regular review has its own competitor’s section. If you are interested in a projector that was reviewed months ago, but curious as to how it compares to more recent projectors, look to the review of the newer projector, in its competitors section.
e the shape of your screen to match the content you are viewing. You can have them with fixed wall screens, or and motorized screens can be ordered with them from some manufacturers. You can adjust them for the aspect ratio of the content you are viewing. (They are normally motorized and work remotely, by screen trigger, room control system, or normal remote control.) They will move black material in place to cover what isn’t being used, for a nice tight framed image, and no visible letterboxing. Stewart sells many high end screens with masking systems, as well as those without. Some screens have masking systems that can be added later. One intriguing product is Carada’s Masquerade, a relatively affordable masking system that can be added to almost any fixed wall screen. The Carada system sells starting around $2500 for smaller sizes, and a 110″ will set you back about $2750.
11. In a contest with a small child, a low mounted screen loses everytime!
12. Some motorized screens are designed to be installed inside your ceiling to be more or less invisible when not in use. Fixed wall screens do not require rocket science to assemble. Anyone halfway competent with a screwdriver and pliers shouldn’t have a problem. And most importantly if you are mounting a screen yourself, make sure it’s perfectly level.
© 2017 Projector Reviews