Sony VPL-VW90ES Projector Calibration and Settings – 1

Sony VPL-VW90ES Post Calibration Grayscale: User 3 (based on Cinema)

Color Temp over IRE Range (Post calibration):

20 IRE6116
30 IRE6519
40 IRE6634
50 IRE6653
60 IRE6620
70 IRE6560
80 IRE6477
90 IRE6436
100 IRE6552
Average gamma2.23

Mike NOTES:  Results were almost identical to the VW85.  The grayscale was further off than the VW85 with default settings, but the VW90 has a lot of hours on it.

Art Adds: The projector arrived with over 200 hours on the lamp. That probably already cost Sony about 5-10% in brightness. Keep that in mind.

RGB Settings

Calibration settings for User:  Iris off, all other settings same as pre-calibration or as stated below.

Calibration settings for User:
Color Temp on Custom 4, Iris off, Gamma on 5, Color Space on Normal, all other settings on default or as previously stated.

Left below “best mode”, on the right: “Brightest mode”

User – Custom 4 Color TempUser – Custom 5 Color Temp
GainR =2R =30
G =0G =0
B =-12B =0
OffsetR =8R =0
G =0G =0
B =-6B =0

Lumens at 100 IRE:

588 @ 6552                           751 @ 8907

And that covers all the settings Mike came up with and I got to enjoy!

You May Also Like

News and Comments