Mitsubishi HC6800 Projector Review
Mitsubishi HC6800 Post Calibration Grayscale
When done with the calibration, the HC6800 achieves color accuracy about as good as any other projector recently reviewed, including the JVC DLA-RS25
Color Temp over IRE Range (Post calibration)
|Average gamma 2.18|
Mike put it this way. The default gamma is almost dead on, averaging 2.18, with unusual tendencies.
The dynamic iris is nicely done. I’ve found it to be one of the least noticeable out there. In fairness, though, the blacks, being not that spectacularly black, might indicate that the range of the iris isn’t particularly great. And in that case, it’s easier to make iris action a bit less detectable.
Mitsubishi HC6800 RGB Settings
These are the adjustments we made to Red, Green and Blue for the grayscale balance.
Calibration of best mode is saved on AV Memory 1.
Default settings for all is 0.
You may only choose from Cool, Warm or Medium as a starting temp in User. Medium color temp as reference in User.
User 1 gamma is set with RGB at 6 on Low, Blue at –1 on Mid.
Medium Ref. Color Temp, User 1 Gamma
|Contrast||R = -1
G = 0
B = 0
|Brightness||R = -16
G = 0
B = -31
|Output at 100 IRE 578|
Since the High Brightness cannot be adjusted, we could have created an alternate “brightest mode, with other combinations, although that would have kept maximum brightness under 800 lumens. We’ll leave that to you.
You May Also Like
Viewsonic Pro8530HDL Projector Review
BenQ HT6050 Home Theater Projector Review
The Optoma ML750ST LED Projector Review – Part 1
HT Projectors: Sony VPL-HW45ES vs Epson HC5040UB
Epson Home Cinema 5040UB vs. JVC DLA-RS400U – A Comparison Review
JVC DLA-RS600U vs. Sony VPL-VW365ES – A Comparison Review
InFocus IN1118HD Mobile Projector Review
Sony VPL-HW45ES Home Theater Projector Review