Epson Home Cinema 8350 Projector Calibration and Settings-2

Posted on October 6, 2010 by Art Feierman

RGB Settings

To get the color temp settings above, the following adjustments were made to Gain and offset. Also listed are the Saturation Tint and Gamma settings. Essentially Mike is saying that you need to set the gamma to 2.4 to get close to a real 2.2.


	Cinema (on User 1)	Quick Cal of Dynamic (User 2)
Offset	R = -5	R= -30
	G = 0	G= 0
	B = -7	B= 0
Gain	R = -1	R= -10
	G = -1	G= -20
	B = 0	B= 0

Color Saturation:	-7	0
Tint:	0	0
Gamma:	2.4	2.4

Lumens at 100 IRE:	467	1240

Brightest Mode

NOTE: Dynamic mode is high in green, low in red at 100 IRE, but high in red as you move down the IRE range, hence the Red cutbacks in the QuickCal. Overall, the end result looked very good for a brighter mode. Sports looked awesome. Lots of wow factor!